Intake manifold -BGM PRO Evolution- Piaggio - CS = 23mm. Open intake manifold for all Piaggio scooters with the 50 cc engine housing. The ideal connection between the Dellorto, Gurtner and Arreche carburetors with 23 mm connection width. The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher [...]

Special tool for assembling the primary drive in Vespa smallframe engines GENTLE ASSEMBLY With the primary wheel pulling tool from bgm, the large primary wheel is gently drawn into the bearing seat. The bushing of the assembly aid is supported on the inner ring of the bearing. Therefore, no pressure is transferred to the sensitive bearing surfaces, balls and the motor housing during assembly. The [...]

bgm - Item number: 3333175 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frame> Fork> Screw sets Other customers who are interested in screw set front shock absorbers -BGM ORIGINAL- Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB, Wideframe V30-33, VM, VN, VL, GS150 [...]

BGM Pro Spezial crankshaft with the hub and connecting rod of the 50ccm models (43mm / 87mm) combined with the large alternator stump (Ø24 / 25mm) of the PK125 ETS models. Most stable 50cc crankshaft on the market, fits into every smallframe housing with the appropriate bearing: V50, PK S, PK XL, PK XL2! For conversion bearings see accessories. Suitable for the following engines to use cylinders for V50 / PK50 [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

Connection rubber -BGM ORIGINAL- with 34 mm connection width. High-quality connecting rubber for carburettors with 34 mm connection width, such as: bgm PWK 24 bgm PWK 28 bgm PWK 30 Keihin PWK 28 Mikuni TM 30 Mikuni TM 27 Dellorto PHBH 28 Dellorto PHBH 30 Dellorto VHST 28 The rubber has an inner one for a perfect fit on each side [...]

bgm - Item number: BGM0292HS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.5mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Here in a special version for auxiliary shafts from the Italian manufacturer DRT Racing. Its auxiliary shafts move the clutch 1,5mm further towards the clutch cover. In order to avoid distancing, we offer a coupling that compensates for exactly this 1,5mm. [...]

BGM PRO Double Layer Filter made by Marchald for Polini CP carburettors Extra short air filter especially for the popular CP carburetor series from Polini. With a depth of just 30mm, it is perfectly suitable for Vespa Wideframe or laminated boards. The 55mm version is also a very nice option for Vespa Smallframes. Form specially manufactured for BGM especially for the CP [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]