Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM8015B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in axial needle roller bearings -AXK 1024 / NTB 1024- (10x24x2mm) - (used for clutch pressure plate BGM8015), also looked for: needle roller bearings | Warehouse | Roller bearings | [...]

Engine oil dipstick BGM PRO made of CNC machined, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary ~ 10min. let cool down. Vehicle [...]

Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) The 133 is turned off accordingly and set higher. At the same time, you get larger transfer ports and more pleasant control times. Here is the distance for your own conversion, which is already included in the WS5002 kit. bgm - Item number: WS5159 Availability: in stock (Please check the [...]

The bgm PRO clutch steel discs are manufactured exactly flat and allow the clutch to be separated precisely. The clutch can be perfectly dosed thanks to the very good concentricity. Perfect concentricity No burrs Good controllability of the clutch Linings separate cleanly Suitable as a replacement for the original steel discs, no modifications necessary. We recommend BGM Pro Street gear oil as a lubricant [...]

Motor housing bolt set that contains all removable motor bolts of the motor housing. The bolts are made of high-strength steel (10.9) and are permanently protected against corrosion by a browning process. Also included are the snap rings, washers and nuts, all of which are galvanized. The set corresponds to the original dimensions used ex works and is a high-quality 1: 1 replacement for the original [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

bgm - Item number: BGM6482BLX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake pedals Other customers who are interested in clamping plate bolts Ø = 5x18mm + split pin, Brake pedal -BGM ORIGINAL- Vespa VNA, VNB, VBA, VBB, Super, GL, GT, GTR, TS, Sprint, GS, SS, Rally, PX - [...]

Carburetor kits specially put together for the RaceTour Lambretta cylinders. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]