bgm - Item number: BGM2280 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Frame> Handlebars> Shift gas pipes Other customers who are interested in gas pipe -BGM ORIGINAL- Vespa PX , PK S, PK XL1 - l = 177mm Ø = 24mm, also looked for: Gas pipe | Inner tube | Gas wave | Throttle [...]

Corresponds to the original spare part and is therefore of the very best quality. Excellent replacement part for anyone who has serious problems with their ignition. bgm - Item number: SR163030 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,62 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition -BGM ORIGINAL base plate- [.. .]

bgm CDI with integrated ignition coil for all electronic Vespa and Lambretta ignitions based on the so-called Ducati ignition. Here in the complete kit with a suitable spark plug cable and spark plug connector with the corresponding rubber seals. Suitable for: Vespa PX Vespa PE Vespa T5 Vespa PK Lambretta DL / GP electronic Lambretta with conversion to electronic ignition All Vespas [...]

bgm - Item number: BGM2290B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Motor> Gearbox> Coupling arms Other customers who are interested in switching scales set incl. adjusting block -BGM Pro made by JPP, aluminum CNC- Lambretta LI, LIS, SX, TV (series 2-3), SX, DL, GP - black anodized [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The main nozzle of the SI carburetor determines how much gasoline is made available for the so-called premix or pre-expansion. The larger the displacement and the higher the liter output, the greater the need for spraying, roughly speaking. The available palette ranges from 90-160. A 102 main jet has a bore of 1,02mm, and is therefore less [...]

bgm - Item number: BGM2775 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 75mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

bgm - Item number: BGM4570 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frame> Brakes> Brake-clutch levers Other customers who are interested in clutch levers -BGM PRO CNC cable - Vespa Largeframe 1957-1998 - PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180, Smallframe [...]

Connection cable between tank sender and vehicle wiring harness. No longer available from Piaggio, now available as a high quality reproduction from BGM. Like the original: with cable ties around the rubber bougier tube to the frame, wiring harness-specific connector Suitable for all Vespa PX models from 1984 with plastic fuel tank sensor. Also suitable for Vespa T5 and PK XL with plastic tank sender. bgm - Article number: SC5008 Availability: on [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

bgm - Item number: 1083608 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL ( Made in Germany) Ø = 9mm x 48mm- Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, [...]