The bgm PRO Twist intake manifold combines the possibility of installing a large carburetor with an intake cross-section of up to 30mm (inner diameter of the nozzle on the clamp 34mm) with the great advantage of completely free positioning. The rubber is rotatably mounted if the mounting plate has not yet been tightened. This means that the carburetor could also move forward in the direction of travel

Lambretta cylinder base gasket with a thickness of 1,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Complete set to match your indicators and the taillight perfectly to the look of the scooter. With a few, easy-to-use hand movements, you get a great look! 4 indicator glasses + rear light glass in WHITE! bgm - Item number: K070193 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,43 kg Category: [...]

bgm - Item number: BGM1220MAPV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Seals Other customers who are interested in seals crankcase / fan wheel housing (5x) -BGM PRO silicone Lambretta LI. LIS, SX, TV (Series 2-3), DL / GP 125-200 are also interested in: Seal | Crankcase | [...]

bgm - Item number: BGM1550H Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,31 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO 150 ccm, wideframe , Faro Basso, Ø = 57mm, stroke = 57mm- Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T are also looking for: [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Is used to mount the split roller bearing of the main shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized [...]

bgm - Item number: BGM3000EC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,02 kg Category: Oil & Chemicals> Oil Other customers who are interested in oil can (empty) -BGM PRO Oldie Edition (Vintage tin can) - 1000ml, also searched for: two-stroke oil | Two-stroke | 2 stroke | 2 | Clock | [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Corresponds to the original spare part and is therefore of the very best quality. Excellent replacement part for anyone who has serious problems with their ignition. bgm - Item number: SR163030 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,62 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition -BGM ORIGINAL base plate- [.. .]